Competition Mounts

Competition Mounts


16×20″ Competition mounts, usually vertical orientation, however some competitions allow horizontal display. Ensure you leave enough overlap for ease of mounting your image when ordering your opening size.
SKU: N/A Category:

For your information the below is the entry requirements for AIPP entry, image must be supplied or printed with us for permanently bonded AIPP option.

AIPP Print Entry Requirements: ref AIPP website 2013

Preparing Your Print Entries For Judging– Print identification labels must be printed via the online entry process and adhered to the back of each print in the top left hand corner. These are not self-adhesive labels, so you will have to use sticky tape or glue.No titles or marks which identify the author are permitted on the front of the entry. However copy/text may be included where it is an integral part of the design (this often applies to Commercial entries).– The size of the photographic image(s) must be no smaller than 10 inches (25 cm) on the longest edge. The only exception is for original Polaroid prints and Polaroid Transfers where the medium dictates the size, in which case the image may be presented at full size. For digital capture, there is no exception.If you have more than one image on the mount, then the combined length of the images must measure no less than 10 inches (25 cm) on the longest edge. Images must be permanently bonded to 16×20″ (40.6×50.8 cm) mountboard. Window mounts, permanently bonded also, can be used and are recommended, but the total thickness of the entry must not exceed 6 mm. Hinge mounting is not permitted. Multiple images on one mountboard are acceptable and will be judged as a single entry.

Additional information

Orientation of Mount

Vertical, Horizontal

Mounting Method

Hinged, Permanently Bonded

Position of Mount

Weighted, Central

Supply Of Print

Mailed In/Hand Delivery, Printed By Arts Edge, Mount To Be Empty